The concept of using a dab rig or oil rig has been gaining more and more traction as the hobby heats up. A dab rig also known as an oil rig is very similar in appearance and design to a glass water pipe. However, dab rigs are designed specifically for the consumption of oils.
Begin by adding water to the chamber of your dab rig. Brand-new nails are made of fresh materials that contain trace elements of a multitude of natural minerals metals.
Seasoning a nail helps to fill the pores with carbon from burnt oils, therefore stopping the leaching. To season, place the nail in the rig and heat it with your hand torch until you start to see the nail turn red. Once the it fully coats the nail, use tongs to remove the nail and place it into a bowl of water.
Repeat this process at least three times before using your new nail for the first time. Take your dabber also known as a wand and pick up a small amount of herbal concentrate. Remember, a little goes a long way with this method of consumption. Set this aside for a minute. Take your hand torch and heat up the nail, making sure that the flame is pointed away from the dab rig at all times. Otherwise the heat may crack the glass. Heat until the nail is red hot. Once the nail stops glowing, wait for about 45 seconds.
We wait until the nail is entirely red hot in order to ensure a reliable starting point for our timing. Once the nail is no longer red hot, it signifies that a certain temperature has been reached in which we can consistently count down in order to get the same optimal temperature every time.
You should always wait at least 10 seconds. After your nail has cooled slightly, pick up your wand and place the oil around the nail. While doing this, pull air through the chamber, making the water bubble as the vapors are produced. You will see the vapors filling the glass as the concentrate melts. Inhale the flavorful herb as it comes out of the downstem. Continuously inhale until you no longer see vapor in the chamber of the dab rig.
Once the vapor is clear, lower the rig and exhale. Continue to heat the nail and insert oil as many times as desired. Take the hand torch and heat the end of the wand that touched the wax. It should only take a second of heat in order to melt away the residue. Wipe clean with a rag or alcohol swab while the residue is warm and easy to remove. Option 1 : Heat your nail with the torch until all residue is eliminated.
How to DO meth. (So you don't get confused in all my other entries.) * I was wrong with some of the
Option 2 Quartz Only : This method is to be used only for low-temperature dabs. Immediately after inhaling, take a Q-Tip and dip it into Isopropyl alcohol.Why don't fictional characters say "goodbye" when they hang up a phone? If we can't tunnel through the Earth, how do we know what's at its center?
All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply. Hottest Questions. Previously Viewed. Unanswered Questions. Needs a Topic. We need you to answer this question! If you know the answer to this question, please register to join our limited beta program and start the conversation right now! Related Questions Asked in Civil Engineering, Industrial Engineering, Mechanical Engineering, Bridges and Tunnels On some sections of railroadtrack there is a second set of rails inside the rails the train actually runs on These may be found on a bridge or in a station What is the purpose of these rails?
The inside set of rails is to help a keep a set of wheels or truck that have derailed heading in a forward direction. That way instead of the cars pilling up and derailing on the bridge or in the station the cars stay upright and continue on past the location that needs to be protected.
The ease of which one can set up a portable hot tub depends on the brand which is purchased. However, most portable hot tubs are fairly ease to set up.
Asked in Geometry Are the metal rails that make up train tracks an example of parallel lines intersecting lines or perpendicular lines? These rails are parallel. The expansion of the steel rails on a hot day would split and tear up the continuous strip of wood.Making Glass Tubes with a Bubble on the End
Individual railroad ties can shift a bit as necessary to adjust ot the expansion and contraction of the rails. Asked in Swimming Pools, Pool Building and Repair, Pool Care and Cleaning What should you do if you took some top rails off to tighten the liner when putting up your above-ground pool after partially filling it and now you can't get the rails back on and the sides are bowed?
Drain the water. You have messed with the pool structure causing the walls to bow from the weight of the water. You can lightly mark the liner where you want it to be and the drain the water set your rails back and then fill the pool up. Asked in Dieting and Weight Loss What are the best diets for men? The best fitness diet for men can be found in the P90x box set. They say that high protein and carbs are better for bulking up and gaining muscles for a hot body.
Asked in Biology, Genetics What molecules make up the rails of the dna structure? Deoxyribose sugar molecules alternating with phosphate molecules make up the "rails" of a DNA molecule. Asked in Chemistry How do you set up a hot water bath in chemistry? Then turn on the hot plate and place the beaker on top of it.Don't have an account yet? Get the most out of your experience with a personalized all-access pass to everything local on events, music, restaurants, news and more.
That's so old-school. Get with the times. Or, more specifically the time: to be exact. In honor of the newest excuse to get stoned, we here at Mile Highs and Lows have come up with a list of ten ways to smoke your oils, waxes, budders and hash — a few of them a bit cheaper and well, more unconventional than others.
These dabs can easily be done with a few items from any average stoner's home: a bowl preferably a water pipeaquarium rocks, torch lighter and a paper clip. Once you have the items fill your bowl with the clean and dry aquarium rocks, heat them up with the torch,then use the safety pin to press on the oil and you are dabbing away. This is the only item on the list that has not been tested by the Mile Highs and Lows Completely Unscientific testing crew though and quite frankly freaks us out especially with those color-dyed rocks.
But it's still worth mentioning and is probably something a few of you Stoner MacGyvers have done in a pinch. What you would think would be an ingenious idea of ditching the torch and still getting giant rips, actually couldn't result in a more unpleasant smoke session.
The idea is to take an Herb Iron, basically a soldering iron with a porcelain tip and use it to heat your oil on the nail of your rig of your choice or the oil can be dabbed straight on the iron and sucked up like a knife hit. This all sounds great in theory, but it ends up tasting like smoking heavy metals and wasted more oil than it burned. This is definitely not the most efficient use of your oil, but it will add that extra kick to your bowl of flowers.
All you need is a bowl packed up with some green then sprinkle a little wax or oil on top — just be careful when you light it, as the oil can ignite and waste your hash. Joint Dabs: The joint dab stems from the same idea as the flower dab, but is a little more minimalistic.
With just a rolling paper, oil, flower and cigarette lighter you are on your way to high heaven. Take the paper, wrap it around your finger inside out and spread a thin consistent layer of oil on it. This type of dab does take some work though, as the oil must be heated to a runny consistency and then allowed to dry before rolling and smoking. Hot Head Dabs:. Hot Heads are one of the cheaper yet efficient and semi-portable ways to smoke straight BHO. Hot Heads come as a bowl attachment or you can buy a pipe with one already attached.
A hot head bowl differs from a typical flower bowl, because it has three holes on the side of it rather than one hole in the bottom. This way you can load a bit of oil shatter or wax is recommended in the bottom, then with the glass rod glowing hot, place it inside the bowl and hit it like a normal pipe. The ultra portable way for any stoner-on-the-go to dab. While you aren't going to get that huge ripper you are with a nail stuck in a diffused bong, it is far more economical to pack around and brings a whole new meaning to a sneak-a-toke.
You can get immensely baked off just a couple puffs and leave behind just the hint of an odor. Several of the pens, like the one on the right, are dual purpose and can be used to vape flowers as well. Probably the most traditional way of dabbing if that term can be used for a phenomenon that is relatively new.
How to Blow Glass Pipes at Home
If you already own a glass-on-glass bong, a rig really isn't that expensive. You only have to buy a double-male joint, the skillet, and a torch and you are on your way.
Once you have the setup, the process is straight forward: heat up the plate with a torch then slide it under the bell, press the oil onto the hot plate and inhale.
Repeat as needed.I wanted to give my mucous membranes a break, and methamphetamine hydrochloride is pretty versatile, so:. Yeah, I can feel the buzz when I smoked this cigarette, but it seems wasteful to me. It made my only! I lost all the Cones placeholder straws [sixthseal. The events described in the post are long past and I no longer have anything illegal in my possession! I like meth. I like meth a lot. No, seriously. I love it so much I make posts like this.
I love it so much my teeth are falling to bits.
Mounts for Lights
Disclaimer: This is not a serious post, I do not possess anything illegal. I recommended it on digg. Nevertheless thank you for this information. This is getting a bit more subjective, but I much prefer the Zune Marketplace.
You then can listen to a playlist created based on an amalgamation of what all your friends are listening to, which is also enjoyable. Those concerned with privacy will be relieved to know you can prevent the public from seeing your personal listening habits if you so choose. Write more, thats all I have to say. Literally, it seems as though you relied on the video to make your point. You clearly know what youre talking about, why waste your intelligence on just posting videos to your blog when you could be giving us something enlightening to read?
Useful information shared. Iam very happy to read this article. Fantastic walk-through. I appreciate this post. Sometimes I just think that people write and dont really have much to say. Not so here. You definitely have something to say and you say it with style, my man! You sure do have an interesting way of drawing people in, what with your videos and your words. Youve got quite a one-two punch for a blog! The next time I read a blog, I hope that it doesnt disappoint me as much as this one.
I mean, I know it was my choice to read, but I actually thought youd have something interesting to say. All I hear is a bunch of whining about something that you could fix if you werent too busy looking for attention.
I have been just analyzing this post it is very well written, My organization is looking around on the web searching for just how to begin this blog thing and your site happens to be extremely high quality. When I originally commented I clicked the -Notify me when new comments are added- checkbox and now each time a comment is added I get four emails with the same comment.
Is there any way you can remove me from that service? Great communication I recently find your blog and have been reading along. I thought I would leave my first comment. Detail blog. I will keep visiting this blog very always.
There is some validity but I will take hold opinion until I look into it further.I've read a couple articles on how to make a bulb for smoking meth, and I have yet to see one article that explains a good method.
Over the past 3 years I've mastered the art of pipe making, and in this article I'll explain how to make a meth pipe that works better than anything you can buy commercially. First things first, your going to need a few things. Also a comfortable place that isn't too flammable would be a good idea bathroom, garage, work shop.
Heres a list of materials, most of which can be bought at walmart. Once you've got all the materials, go to your work space and get comfortable I prefer sitting cause there really isn't any need to be standing up.
Using your scissors cut the metal end of your bulb. You should be cutting right on, or before the first thread closest to the end that screws into the socket.
The scissors should bend or cut the metal quite easily, without breaking any glass. They may; however, cut through some ceramic material, don't worry. Once you've cut around the entire metal piece, remove the end with one good tug. There is just a wire holding it on. Now, there should be a small glass rod sticking up out of a hole kind of like an outtie belly button. If it isn't taken off, add more salt, or fill it with water and wash it out dry completely before proceeding.
Make sure you pour out the salt. If you bulb was colouring on the outside xmas bulbsuse the edge of your scissors, a razor, an exacto blade, or something else sharp to scrape off all the colour scrape all of it off. The glass will go red hot in the spot where the inner flame touches fairly quickly.
That's about it. I learner all this through trial and error. You can fool around with glass blowing to find a technique of your own. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only.
We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
Ads presented by the AdBrite Ad Network. Bad Ideas. Booze - The Legal Drug. Legal Issues of Drug Use. Miscellaneous Drug Information.
Rare and Exotic Drugs. Materials: a blow torch with a pencil flame it is very important that the torch has a pencil flame.
Meth Hot Rail
To the best of our knowledge, the text on this page may be freely reproduced and distributed. If you have any questions about this, please check out our Copyright Policy. Hot Topics. Pesticide synth. Where to Start? Fishtea's E-Book Collection. Insering Drugs onto blotter paper?
Concrete Question.Does anyone know how the rail workers would cut railroad rail while on the job back before torches were around and way before gas powered chop saws? I seem to remember a conversation that I had with someone and I believe I remember them saying they used to use huge cold chisels and hammers and just chisel the top and eventually the rail would break.
This conversation might be a figment of my imagination but if any one has any knowledge of this I am curious to know. It is tough to cut rail with modern technology but they did it back in the day I am sure so how did they do it? A coworker of mine's father retired from the railroad a long time ago. He's 94 He said they would just score the top of the rail and drop it across another rail section and it would break off.
Not sure how they scored it, though. I heard the rails for a streetcar were cut all around with a cold chisel, and next the piece was given a few tap s with a sledge. Other option is sqaing it with two people, saw a pic of two chinese workmen doing so. Tried it once and it works, but takes a lot of time I think this has been discussed here before. You might be able to find the topic if you dig through search results a bit. I seem to remember the scoring method discussed, and also talk about a huge handled cold chisel.
Im not sure about cutting it but I have seen first hand a "C" frame punch that used rifle casings as power to punch holes for the tie plates, You put the blank in and smacked it with your hammer You can still find sledge handled RR cold cuts fairly easily. Many folks try to sell them as splitting mauls but they have too small an eye to be good for that and a fairly narrow cutting end.
Hand powered hacksaw on a frame with a lever handle to wank them to and from, we have some still at work, I'll try to remember to photograph some and post them here.
A local tool dealer sometimes has what he calls rail cutters, basically large handled chisels that he says were used to cut rail road rails. So is the fact that you can basically cut the rail by scoring and snapping supposed to make me feel better when I watch those long trainloads of liquefied propane or chlorine gas rolling through town? For that very reason the railroads spend a lot of money on Ultra sounding rail for internal defects and derailment prevention. They test the rail on gross tonnage over the rail.
One of the locals here who is only 50 said when he worked in New Mexico every mornig they stopped and got a chest or two of ice.Tim Anderson has been freelance writing since He spent more than 15 years as a third-generation tile and stone contractor before transitioning into freelance writing.
Old railroad tracks have a variety of uses, ranging from sections that are cut down to be used as anvils in forges to decoration for backyards that have replica trains.
As thick pieces of metal, there are only a few ways you can reliably cut through them, and all of the various methods have a basis in heavy construction. As long as you have some spare time and the willingness to learn, you can use a variety of tools to cut a track down to size. One of the simplest tools you can use to cut large pieces of metal like railroad tracks is an angle grinder.
While the 4-inch variety is too small to handle the size of a piece of track, the larger 8- and inch versions have more than enough horsepower and size to handle the job.
A metal blade is required, as is the physical strength to wield the machine, but it is one of the best ways to accomplish the task. Miter saws are more commonly associated with wood jobs, and are known as chop saws because they are lowered into the wood to "chop" off the end of the cut. However, you can also insert metal cutting blades in place of wood ones, allowing you to cut pieces of metal. You will need a larger version with an 8-inch blade or bigger, but the same principle applies.
The track is laid in the tray of the saw and the blade pulled down into the metal to cut through it. Although it might be difficult getting your hands on one given the fact they are usually only available to professionals working in the field, there are specific rail cutting saws that are used in the railway industry.
They are the same design as the larger angle grinders, with a motor and blade body that is held in both hands and pushed down into the track as you cut. If you have access to one, this is your best option for cutting rail tracks. While it does require a bit of training to use one properly, a cutting torch is one of the easiest ways to cut large sections of metal.
They work better with sheet metal than with large sections of steel or other material due to the fact that they melt the metal to cut it rather than actually cutting through the material, but they are still a viable option.
If you have one in your shop or have a friend who has one, this is another option for cutting tracks down to size. Pin Share Tweet Share Email. There are several ways to cut large pieces of metal. Angle Grinder. Miter Saw. Rail Saw. Cutting Torch.